The AMECOIL kits

	Used in all industrial sectors, the standard or self-locking AMECOIL® SR thread insert is indispensable for the resistance of quality assemblies.
AMECOIL® SR kits are indispensable for repairing all types of defective tapped holes. Regular workshop kits, they are necessary for the factory servicing and maintenance departments.

Material	Maximum operating temperature*	Surface coating options	Applications
Standard material Stainless steel 18.8 AISI 304 (1.4301) AISI 302 (1.4310)	425°C (peak) 315°C (continuous)	- Dry lubrication - Cadmium plating - Silver plating - Zinc plating - Tinning	All normal applications in all materials
Special stainless steels: AISI 304L, 316, 316L, 316Ti, 321	Up to 400°C continuously		Special applications Resistance to acids, corrosion, high temperatures – non-magnetic
Phosphorous bronze	300°C (peak) 250°C (continuous)	Cadmium plating	Copper parts. High resistance to some electrolytic couples.
Inconel x 750 Nc 15 Fe Nba	750°C (peak)	Silver plating	Thermal power plants Aerospace Aeronautics Turbochargers
Nimonic 90 Nc 20 C. 18Ti	538°C (continuous)

(*) indicative values

BEFORE          AFTER	The thread insert is fitted by screwing it on to the AMECA instrument threaded pin, with a knob or handle, until the drive hooks on to its end. Screw the assembly into the threaded hole until the insert is completely in, then turn by 1/4 or 1/2 turn.		Either with the handle Or with the knob (up to diameter M8) Pin
Thread    Thread spoilt      saved

 

 

The advantages - CAN BE USED:
for a first installation, for repair, for reworking

 

• Cannot come loose The outer diameter of the AMECOIL® SR thread insert has a larger diameter than that of the threaded hole. Adhering strongly to the threaded hole, it can practically never come loose once installed.
• Resistance to corrosion and other threats The AMECOIL® SR thread insert prevents deterioration of threads due to pulling, vibration, fatigue, seizing or corrosion while resisting the highest temperatures.
• Regular distribution of loads
• Reduction of bosses
• Resistance to premature wear
• Simplification of locking systems
Drilling From +0.1 to +1 mm of the nominal diameter of the screw.	Tapping Performed with the AMECOIL® tap.	Installation Using the tools of the conventional series or those of the new series, for even quicker installation.	Installation Using the threaded pin of the AMECA tool, fitted with a handle or knob.